NEW! Hawk Performance now offers a .810 Brake Rotor that is 100% American Made! This rotor will give you more life up to four times the rotor life than the typical cheap "China" rotors out on the market today. All rotors are inspected and true to .001 verses the competition which is over .1 on run out.
Tech Tip:
Bedding Procedure:
1.After reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.
2.At higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly to a light drag (25 lbs). Repeat five times.
3.At or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly to a light drag (25 lbs). Repeat three times. Allow a few seconds between brake engagements while car is in motion.
4.Do not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.
5.If during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.
